Product Data 產品資料: Tempilink G-FRC-903
EO Gas Sterilization Indicating Ink 環氧⼄乙烷滅菌指示油墨
This easy to apply, easy to clean up waterborne ink will produce a flexographic print, capable of
functioning as a process indicator for EO gas sterilization process.
本水性油墨容易印刷或清潔，適用於柔版印刷，作為環氧⼄乙烷氣滅菌的程序指示器
PERFORMANCE CONDITIONS: Requires EO gas, Moisture, and Temperature. Increasing amounts of
each, decrease time required for signal development. At 600 mg/l EO gas and a temperature of 120°F
(49°C), and relative humidity in the range of 60%-85%, color change will develop.
顏色轉變條件: 環氧⼄乙烷氣，濕氣，溫度，增加以上變色條件，可縮短變色時間。于環氧⼄乙烷氣濃度
600mg/l，120°F (49°C) 及相對濕度60%-85%，顏色開始轉變。
*We recommend not adding more than 5 % thinner. However, this amount can be exceeded as long as you
check that you get a good initial (print) and good final (signal) color.
*建議稀釋不超過10%，但也可以在經過測試效果滿意的情況下，按需要作適度增加。
Disclaimer: All information on this data sheet is based on general experience and for guideline purpose only.
Tempil makes no representation or warranties of any kind concerning this data
